Step 1

Use sandpaper to adjust the pieces more smoothly.

Step 2

It is highly recommended to paint all pieces before assembling.

Step 3

Choose the inside and outside of the building. Verify before you glue if the pieces fit together.

Step 4

Apply PVA on the edges of the 2 groundfloor pieces. These will make the length of your house.

Step 5

Immediately glue the 4 pieces of your groundfloor together. Let it dry for 15 minutes.

Step 6

Dispose the the first floor on top of the groundfloor.

Step 7

For the first floor, apply PVA glue on the bottom of all pieces and on the sides of both pieces that will become the length of your storey.

Step 8

Glue the pieces together as you did with the ground floor (see 5).

Step 9

Use light pressure towards the bottom.

Step 10

Use light pressure to reajust towards the centre. Let it dry for 15 minutes.

Step 11

Apply PVA on the upper edges of the roof support-pieces.

Step 12

Place the roof support-pieces on a long piece of cardboard to avoid the rooftiles annoying the assemblage.

Step 13

Leave 12 mm space on top. Let it dry for 15 minutes.

Step 14

Apply PVA on the upperside of your roof.

Step 15

Finally, glue the rooftops together on the top of the building. Wait for 30 minutes before gluying the accessories and your house is ready to play.